Bolt Bun LLC
Map this listing
Bolt Bun LLC
Will Ryan (Founder/CEO)
Will Ryan (Founder/CEO)
3982 Powell Road, Suite 11
Powell, OH  43065
Phone: 833-265-8286
E-Mail: Forward to a Friend
Highlight Description:

Bolt Buns are anchor bolt protection and safety devices for use in new construction and industrial facility applications. The Bolt Bun’s patented design surrounds and protects anchor bolt projections against damage from trucks and other equipment working on site. It also helps protect workers from a dangerous trip and impalement hazard. Bolt Buns are primarily intended for the temporary protection of anchor rods until steel columns can be installed, but can also be utilized as a permanent safety solution.

Highly visible and durable, Bolt Buns are made in the USA from UV-resistant HDPE. Bolt Buns are reusable and recyclable. The Bolt Bun’s shape allows wheels and tracks to roll over it, protecting the anchor rod within from bending or breaking.

Anchor bolt projections typically sit exposed two to eight weeks while waiting for structural steel to be delivered to the site. During that time, almost half of all new construction projects can expect to suffer at least one damaged anchor bolt. OSHA regulations require that damaged and broken anchor bolts can only be repaired, replaced or field-modified with the review and approval of the project’s structural engineer of record. Sometimes the fix is relatively easy, like installing new epoxy anchors and drilling new holes in base plates. At other times circumstances require much more involved repairs, like jackhammering concrete and re-pouring foundations. Whatever the fix, it will typically mean lost days and added cost.

Beyond the construction costs of repairing or replacing damaged anchor bolts, protruding anchor rods can also present serious hazards to workers on construction sites or within industrial facilities. OSHA regulation 1926.701(b) requires that workers shall be adequately protected from the impalement hazard of projected rebar, usually by use of flat-top caps. There is not, however, an OSHA regulation specifically requiring protection from projected anchor bolts, even though the impalement hazard is similar in nature. In their official response to inquiries seeking clarification on this matter, OSHA has stated that while regulation 1926.701(b) does not specifically apply to anchor bolt projections, the General Duty Clause, which requires employers to provide a workplace that is free of recognized hazards, still applies.

Extended Description:

The Bolt Bun 90 is a specially shaped version that protects the entire group. Bolt Bun 90’s can be installed on rods spaced as close as 4-inches apart.

Product Information:
The Bolt Bun 360 is an anchor bolt protection and safety device that fits over anchor bolt projections and is secured to the concrete with a snug-tight nut. The Bolt Bun 360 can be used for anchor bolt diameters up to 1-inch and with projection lengths of 3- to 6-inches above the concrete surface. Bolt Bun 360’s can protect anchors that are spaced at least 8-inches apart. For closely spaced anchor patterns, like those used for metal building columns, the Bolt Bun 90 is a specially shaped version

More Info
Products / Services: Fasteners
Building Products
Add to Outlook Contacts Founder/CEO (833) 265-8286
Are you looking for more
customized information on a
product or service? Enter your
specific Request for Information,
and get private, personalized
responses delivered to your inbox.

Click Here to Get Started